• Hiring high frequency ultrasonic system enables small dead zone and is possible to measure short distance.
  • High resolution, 0.1 mm
  • Minimize the main unit and sensor unit, so easy to install to the limited area.
  • Sensor part is chemical proof plastic (PFA).
  • Equipped RS-232C interface, 4-20 mA current output, Alarm output allows to communicate with existing system.
  • Flow measurement by measuring catchment level is possible.



Sensing or positioning goods on production line
Liquid level sensing in small size tank


Model HD500-C HD500-D
Channel 1 CH
Frequency  200 kHz 400 kHz
Measurement object Liquid
Messurement range 0.12 to 1.0 m 0.06 to 0.45 m
Resolution internal 0.1 mm
display 0.1 mm
Accuracy ±0.25 % F.S.
±0.25 % F.S.
Refresh rate 0.05 seconds
Directive angle (half of full angle) 10°
Power source Voltage 10 to 28 V DC
Power 3 W (surge 500mA)
Display 4 digits LED
Output Alarm 2 points each for high and low
30V DC, 0.1 A (NPN open collector)
4-20mA current resolution:16bit
(max. load 450Ω)
Interface (distance) RS-232C(10 m or less)


Model Main unit Sensor unit
Operating temperature 0 to 50 deg C
Material ABS PFA
cable: FEP
cable seas: PVDF
cable inner seal: PPE-V
Protection IP43 level IP65 level
WxDxH mm
113x52.5x94 dia 42x39
Cord length - 2 m
max. cord length - 2m
Weight 300 g 150 g
Screw - M32 P1.0
  • Flow measurement by measuring catchment level is possible (HD500-C only).

​​* CE approved

Tag : Ultrasonic | Sensor | Level Meter | Sensor Level |

Artikel lainnya »